BMW 2006 325xi Sedan オーナーマニュアル

80

Press the button in the turn indicator stalk.

Some Check Control messages remain visible 
until the malfunction in question has been recti-
fied. They cannot be hidden. If several malfunc-
tions occur at the same time, the Check Control 
messages are displayed in succession.

They are marked with the symbol shown 
here.

Other Check Control messages are automati-
cally hidden after approx. 20 seconds, but 
remain stored.

They are marked with the symbol shown 
here.

 indicates that Check Control messages have 

been stored. You can view the Check Control 
messages whenever it is convenient for you.

1.

Lightly push button 

1 in the turn indicator 

stalk up or down repeatedly until the appro-
priate symbol appears in the display, 
accompanied by the words "CHECK CON-
TROL".

2.

Press button 

2.

"CHECK OK" appears if there are no Check 
Control messages.
If a Check Control message has been 
stored, the corresponding lamp comes on. 
It is accompanied by a text message on the 
Control Display.

3.

Lightly push button 

1 to check for other 

messages.

4.

Press button 

2.

The display again shows the outside tem-
perature and the time.

iDrive concept, refer to page

1.

Press the 

 button.

This opens the start menu.

2.

Press the controller to open the   menu.

3.

Select "Service" and press the controller.

4.

If necessary, move the highlight marker to 
the uppermost field. Turn the controller 

Online Edition for Part-No. 01 41 0 159 816 - © 09/05 BMW AG