BMW 2005 760Li Sedan オーナーマニュアル

Techn

r co

mfo

rt, co

nveni

nce

d safet

Switching off DSC

Select "Settings". Select "DSC" and con-
firm your selection. DSC is deactivated.
The indicator lamp in the Info Display
remains on continuously.

Deactivating DSC automatically deacti-
vates DTC as well. The systems for
enhancing stability and traction are deacti-
vated, and there is no active braking inter-
vention or torque control.

A status report appears in the Check Con-
trol. Please take note of the additional infor-
mation on the Control Display.

To maintain optimized stability, drive
with the system on whenever possi-

ble.

Reactivating DSC

Select "Settings". Select "DSC" and con-
firm your selection. DSC is now activated.
The indicator lamp in the Info Display goes
out.

The laws of physics cannot be
repealed, even with DSC. An appro-

priate driving style always remains the
responsibility of the driver. Avoid using the
additional safety margin provided by the
system as an excuse for taking unneces-
sary risks.
When DTC is active, DSC provides only
limited system response up to a speed of
approximately 45 mph/70 km/h. Interven-
tion for stability enhancement is reduced.
Do not make any modifications to the DSC
system. Never allow anyone other than
authorized professional technicians to
carry out service or repairs on the DSC sys-
tem.

DBC Dynamic Brake Control

When you apply the brakes rapidly, this
system automatically produces the maxi-
mum braking force boost and thus helps to
achieve the shortest possible braking dis-
tance during panic stops. This system
exploits all of the benefits provided by ABS.

Do not reduce the pressure on the brake
pedal for the duration of the brake applica-
tion. When the brake pedal is released, the
DBC is deactivated.

Malfunction in vehicle stability
control systems

The brake system warning lamp
lights up in red, appearing together
with the indicator lamps for ABS
and DSC. A status report appears in
the Check Control. Please take note
of the additional information on the
Control Display. Driving stability
control and ABS have failed. Con-

ventional braking efficiency remains avail-
able without limitations.
While you may continue, you should
remember to proceed cautiously and drive
defensively while avoiding full brake appli-
cations. Have the system checked as soon
as possible.

Display of the previously described
malfunction on Canadian models.

The DSC warning lamp lights up.
DSC and DTC have failed. Their sta-
bilizing interventions are no longer

available. The vehicle will remain com-
pletely operational, however, without DSC.
Have the system checked as soon as pos-
sible.

The brake system warning lamp
lights up yellow and a message
appears in the Check Control.

Please take note of the additional informa-
tion on the Control Display. DBC has failed.