BMW 2005 X3 2.5i SAV オーナーマニュアル

Air supply/blower

You can select blower speeds 1
to 4. The heating and ventilation
become more and more effective
as the air supply settings are
increased. In position 0, the blower

and heater are switched off. The air supply is
blocked in position 0.

Temperature

To increase the temperature of the
interior, turn to the right.

Air distribution

You can direct air to flow onto the
windows

, toward the upper

body

and into the footwell

All intermediate settings are possi-
ble. In the

setting, there is a

slight flow of air onto the windows to keep them
free of condensation.

Rear window defroster

When the rear window defroster is
activated, the indicator lamp
comes on. The rear window

defroster switches off automatically.

You can have your vehicle programmed in
such a way that the rear window defroster

switches on automatically. It is then switched
on at outside temperatures of less than approx.
+39

7/+46 within 5 minutes of the engine

start.

Air conditioner

The air is cooled and dehumidified
and warmed again as needed,
depending on the temperature set-

ting. Depending on the weather, the windshield
may fog over briefly when the engine is started.
You can reduce condensation forming on the
windows by switching on the air conditioner.

Condensation forms in the air conditioner
system during operation, and then exits

under the vehicle. Traces of condensed water
under the vehicle are therefore normal.

Outside air/recirculated-air mode

You can respond to unpleasant
odors outside the vehicle by tem-
porarily switching off the outside

air supply. The system then recirculates the air
currently within the vehicle.

If condensation starts to form on the
inside window surfaces during operation

in the recirculated-air mode, you should switch
it off while also increasing air supply as
required. The recirculated-air mode should not
be used over a sustained period of time, other-
wise the air quality inside the vehicle will deteri-
orate.

Ventilation

The air vents for the upper body area can be
adjusted:
1 Serrated dials

Serrated dials for opening and closing the
vent outlets through an infinitely-variable
range.

2 Levers

Selector levers for airflow direction.

3 Serrated dial

Use this serrated dial to adjust the amount
of cool air that is added to the airflow
emerging from the vent outlets for the
upper body.