BMW 2005 330i Sedan オーナーマニュアル

 53

To use the automatic function again, move the 
selector lever to the right into position D.

You can manually override the selector lever 
lock in case a defect occurs in which the selec-
tor lever remains in position P although the but-
ton on the selector lever is pressed:

1.

Unclip the sleeve of the selector lever.

2.

Pull the sleeve up over the selector lever 
until the sleeve is inside out.

3.

Using the screwdriver from the onboard 
tool kit, refer to page

, hold down the red 

lever and move the selector lever to the 
desired position in the usual way.

1 High beams
2 Headlamp flasher
3 Turn signals

Press the lever beyond the resistance point.

To turn off manually, press the lever to the 
resistance point.

Unusually rapid flashing of the indicator 
lamp indicates that a turn signal bulb 

needs to be replaced. 
After switching off the ignition, make sure that 
the roadside parking lamps are not switched 
on.

<

Press and hold the lever as far as the resistance 
point for as long as you wish to indicate a turn.

Press the lever as far as the resistance point.
The turn signals flash three times.
You can activate or deactivate this function.
iDrive concept, refer to page

1.

Open the start menu.

2.

Press the controller to open the   menu.

3.

Select "Vehicle settings" and press the 
controller.

4.

Select "Lighting" and press the controller.

5.

Select "Triple turn signal activation" and 
press the controller.

 Triple turn signaling is activated.

Online Edition for Part-No. 01 41 0 159 259 - © 03/05 BMW AG