BMW 2005 330i Sedan オーナーマニュアル

 75

3.

Lightly push button 

1 to check for other 

messages.

4.

Press button 

2.

The display again shows the outside tem-
perature and the time.

iDrive concept, refer to page

1.

Press the 

 button.

This opens the start menu.

2.

Press the controller to open the   menu.

3.

Select "Service" and press the controller.

4.

Select "Check Control messages" and 
press the controller.

5.

Select a text message and press the con-
troller.

To exit the display: 
Select the 

 arrow and press the controller.

You can enter a speed, and a Check Control 
message will indicate when you reach this 
speed. This enables you, for example, to 
receive warnings if you exceed a speed limit in 
an urban area. 

You are only warned of reaching this speed a 
second time if your vehicle speed falls below it 
again by at least 3 mph or 5 km/h.

iDrive concept, refer to page

1.

Open the start menu.

2.

Call up "Navigation".

3.

Select "Car Data" and press the controller.

4.

Select "Limit" and press the controller.

5.

Depending on your vehicle's equipment 
version, select "Change limit:" or the speed 
value and press the controller.

6.

Turn the controller to set the limit.

7.

Press the controller to apply the setting.
The limit is automatically switched on.

Select "Select current speed" and press the 
controller. The system adopts your current 
speed as the limit.

Select "On" and press the controller.

 Limit is activated.

iDrive concept, refer to page

1.

Open the start menu.

2.

Call up "Navigation".

3.

Select "Car Data" and press the controller.

Online Edition for Part-No. 01 41 0 159 259 - © 03/05 BMW AG