BMW 2005 X5 4.4i SAV オーナーマニュアル

Handbrake

Manual transmission

The handbrake is primarily intended to
prevent the vehicle from rolling while
parked; it brakes the rear wheels.

Engaging

The lever engages automatically when
you pull it up and the indicator lamp
comes on in the instrument cluster in
ignition key position 2, refer to
pages

Releasing

Pull up slightly on the lever, press the
button and lower the lever.

If exceptional circumstances
should make it necessary to

engage the handbrake while the vehicle
is in motion, do not pull it too strongly.
In doing so, continuously press the but-
ton of the handbrake lever.
Excessive pressure can lead to over-
braking and loss of traction – fishtailing
– at the rear axle.
The brake lamps do not light up when
the handbrake is applied.
Vehicles with manual transmission:
Always engage the handbrake when
parking on slopes and inclined sur-
faces. Even placing the gearshift lever
in 1st gear or reverse may not provide
adequate resistance to rolling.
Vehicles with automatic transmission:
Place the selector lever in Park.

To avoid corrosion, apply the hand-
brake lightly from time to time when
coasting to a standstill at a traffic signal,
for instance, provided that it is safe to
do so.

Press the clutch pedal all the way down
each time you shift, pressing the gear-
shift lever into its proper end position.

Depress the clutch when starting the
vehicle, too, otherwise, the interlock will
prevent the engine from starting if the
clutch is not depressed.

While shifting in the 5th/6th gear
lane, press the selector lever

toward the right, as otherwise acciden-
tal shifting into the 3rd or 4th gear could
result in engine damage.