BMW 2011 Z4 sDrive35is オーナーマニュアル
Automatic transmission with
Steptronic*
In addition to the fully automatic mode, you can
also
also
Disengaging the remote control
To remove the remote control from the ignition
lock, first move the selector lever to position P
and switch off the engine: interlock.
lock, first move the selector lever to position P
and switch off the engine: interlock.
Selector lever positions
P R N D M/S + –
Displays in the instrument cluster
P R N D DS M1 to M6
The selector lever position is displayed, or the
current gear in the manual mode.
The selector lever position is displayed, or the
current gear in the manual mode.
Changing selector lever positions
▷
With the ignition switched on or the engine
running, the selector lever can be moved out
of position P
running, the selector lever can be moved out
of position P
▷
When the vehicle is stationary, step on the
brake before shifting out of P or N; other‐
wise, the selector lever is locked: shiftlock.
brake before shifting out of P or N; other‐
wise, the selector lever is locked: shiftlock.
Press on the brake pedal until you start
driving
driving
To prevent the vehicle from creeping after you
select a driving position, maintain pressure on
the brake pedal until you are ready to start.◀
select a driving position, maintain pressure on
the brake pedal until you are ready to start.◀
A lock prevents you from inadvertently engaging
selector lever positions R and P. To cancel the
lock, press the button on the front of the selector
lever, see arrow.
selector lever positions R and P. To cancel the
lock, press the button on the front of the selector
lever, see arrow.
P Park
Select only when the vehicle is stationary. The
rear wheels are locked.
rear wheels are locked.
R is Reverse
Select only when the vehicle is stationary.
N is Neutral
Use in automatic car washes, for example. The
vehicle can roll.
vehicle can roll.
D Drive, automatic position
Position for normal vehicle operation. All for‐
ward gears are selected automatically.
Under normal operating conditions, fuel con‐
sumption is lowest when you are driving in po‐
sition D.
ward gears are selected automatically.
Under normal operating conditions, fuel con‐
sumption is lowest when you are driving in po‐
sition D.
Kickdown
Kickdown is used to achieve maximum driving
performance. Press the accelerator pedal be‐
yond the full-throttle resistance point.
performance. Press the accelerator pedal be‐
yond the full-throttle resistance point.
Seite 56
56
Online Edition for Part no. 01 41 2 604 231 - 03 10 500
Driving