BMW 01 41 0 155 307 ユーザーズマニュアル

61

n

The key can be inserted or removed in 
this position only.

After removing the key, turn the 
steering wheel slightly to the left or right 
until the lock engages.

If the key has been left in the ignition, 
an acoustic signal will sound after the 
door has been opened.

460de022

Vehicles with automatic transmis-
sion:

Do not move the selector lever from the 
"Park" position until the engine is 
running (ignition key at position 2).
In order to turn the key to position 0 or 
to remove it, first move the selector 
lever to the position "Park" (Interlock).

<

Turning the steering wheel slightly to 
the right or left often makes it easier to 
turn the key from 0 to 1.
Individual electrical devices are ready 
for operation.

All electrical equipment and accesso-
ries are available for use.

Vehicles with manual transmis-
sion: 

Depress the clutch when starting the 
vehicle. A lockout prevents the engine 
from starting if the clutch is not 
depressed.

<

 

>

Engage the parking brake.

>

Put the manual-shift gear lever in idle 
or in P for an automatic transmission.

>

Depress the clutch pedal. 

Do not run the engine in enclosed 
areas. The exhaust gases contain 

carbon monoxide, an odorless and 
colorless, but highly toxic gas. 
Breathing the exhaust gases poses an 
extreme health risk, and can lead to 
unconsciousness and death.
Never leave the vehicle unattended 
with the engine running. An unattended 
vehicle with a running engine repre-
sents a potential safety hazard.

<

Do not press the accelerator pedal 
when starting the engine.

Do not actuate the starter for too 
short a time, but do not keep 

turning it for more than approx. 
20 seconds. Release the ignition key 
immediately when the engine starts.
Do not allow the engine to warm up by 
leaving it running while the vehicle 
remains stationary. Instead, drive off 
immediately at a moderate engine 
speed.

<

Online Edition for Part No. 01 41 0 155 307 - © 09/00 BMW AG