B&B Electronics Celeron M Universal Network Controller with PC/104 Extension UNO-2170 ユーザーズマニュアル
Chapter 3 Initial Setup
3.1 Inserting a CompactFlash Card
The procedure for installing a CompactFlash™ card into the UNO-2170
is detailed below, please follow these steps carefully.
is detailed below, please follow these steps carefully.
1. Remove the power cord.
2. Unscrew the four screws from the rear panel of the UNO-2170.
3. Remove the rear panel.
4. Plug a CompactFlash™ card with your OS and application program
into a CompactFlash™ card slot on board.
5. Screw back the rear panel with four screws.
Note The CompactFlash™ slot is allocated as
“
Secondary IDE Master
"
3.2 Chassis Grounding
The aluminum made UNO-2170 provides good EMI protection and a stable
grounding base. There is an easy-to-connect chassis grounding point for
you to use.
grounding base. There is an easy-to-connect chassis grounding point for
you to use.
Please connect chassis ground of UNO-2170 with "EARTH" as ground.
Figure 3.1: Chassis Grounding Connection
UNO-2170 User Manual 18