BRK electronic CO250LB プリント

ページ / 2
ELECTROCHEMICAL 
CO SENSOR 
Most accurate technology available for 
detecting carbon monoxide as compared to 
other sensing technologies. 
TWO SILENCE 
FEATURES
Silences low battery chirp for up to 
eight hours or silence nuisance alarm 
for several minutes.
END OF LIFE SIGNAL
Provides audible notice when alarm 
needs to be replaced.
TAMPER RESISTANT
LOCKING PIN
Locks alarm cover to prevent
removal of battery. Perfect for
apartment, dormitory or hotel
applications.
9V BATTERY
INCLUDED
Available in the following versions:
CO250B  
Alkaline Battery
CO250LB  
Long Life Lithium Battery
CAT. 
CO250B/CO250LB
9V Battery Powered
CO
BRK Model CO250 is a single station carbon monoxide alarm specifically 
designed for residential and institutional applications including sleeping rooms of 
hospitals, hotels, motels, dormitories, and other multifamily dwellings as defined 
in standard NFPA 101. Model  CO250 has been fully tested and complies with, 
UL2034, NFPA 720, and NFPA 101 and other agencies that model their codes 
after the above agencies. It meets building codes where battery operated  
carbon monoxide alarms with silence are required and with model building 
codes published by the ICC.
BRK Model CO250 is a state of the art carbon monoxide alarm designed to 
provide early warning of the presence of carbon monoxide. It features an 
electrochemical carbon monoxide sensor, an 85dB horn, a full function test 
switch and a red LED light that indicates DC power or alarm. The CO250B 
features a 9V alkaline battery and the CO250LB a 9V long life lithium battery. 
This alarm has two silence features. Low Battery Silence: Temporarily silence the 
low battery chirp for up to eight hours. Alarm Silence: Silence alarm for several 
minutes. It also features a tamper resistant locking pin that locks alarm cover to 
prevent removal of battery. Perfect for apartment, dormitory or hotel applications. 
The compact, low profile design complements any décor. Battery installation and 
removal can occur while the unit is mounted to the ceiling or wall via the hinged 
cover. When voltage drops to a pre-set warning level, the horn will “chirp” 
approximately once per minute to indicate a fresh battery is needed. To insure 
the battery is always replaced properly, the cover 
is designed to resist closing when the 
battery is missing. Designed
for wall or ceiling 
mounting. Includes 
mounting 
anchors and 
screws. 
ver 
he 
C A R B O N
MONOXIDE
A L A R M
7