Boxlight MP-93i ユーザーズマニュアル

Please basically use liquid crystal projector at the horizontal
position. 
If you use liquid crystal projector by the lens up position, the lens
down position and the side up position, this may cause the heat
inside to build up and become the cause of damage.
Be especially careful not to install it with ventilation holes blocked.

a

11

Determine picture size and projection distance as illustrated below.

a:Distance from the projector to the screen. 

(tolerance : 

±

10%)

This screen size is full-screen size.(1024 dots 

X 

768 dots)

Screen

Adjust the projection position using the foot adjusters at the bottom of the projector.

•

Do not unlock the foot adjusters while you do not support the projector, to avoid falling of
the projector and causing an injury.

•

Do not revolve the foot adjusters by force, the foot adjusters is damaged.

•

Securely lock the adjuster.

•

Do not apply unnecessary force from the upper side when lifting the projector. Otherwise,
projector may be damaged or a finger could be caught and cause injury.

1.  Lift up the projector and press the button of the adjuster to release the lock.
2.  Adjust the projection angle, release the button of the adjuster and securely lock it.
3.  To adjust the angle slightly, revolve the foot adjusters.

Foot adjuster

Lens center

Vertical adjustments
can be made in the
range of 0 to 9°.

Caution

Screen (inch)

a (inch)

Minimum

Maximum

40

64

84

60

97

127

80

130

169

100

163

213

120

196

256

150

244

319

200

326

Horizontal inclination
may be adjusted using
the adjuster at the rear.