Boxlight CD-450m ユーザーズマニュアル
39
Using the Kensington Lock
The projector has a Kensington Security Standard connector for
use with a Kensington MicroSaver Security System (Figure 28).
Refer to the information that came with the Kensington System
for instructions on how to use it to secure the projector.
use with a Kensington MicroSaver Security System (Figure 28).
Refer to the information that came with the Kensington System
for instructions on how to use it to secure the projector.
F
IGURE
28
Installing the Kensington lock
Troubleshooting
Problem: Nothing on projection screen
•
Make sure that the power cord is properly connected to a fully
functional AC electrical outlet. Make sure that the power cord
is also properly connected to the projector.
is also properly connected to the projector.
•
If the projector is plugged into a power strip, make sure the
power strip is turned on.
•
Make sure you have removed the lens cap on the projection
lens at the front of the projector.
•
Make sure the projector is switched on.
•
Check the projector’s lamp to ensure that it is securely con-
nected in the lamp module. See “Replacing the Projection
Lamp” on page 35.
Lamp” on page 35.
•
Make sure that the cables do not have any bent pins.