Blaupunkt Dallas RMD 169 ユーザーズマニュアル
30
Programming with DSC
The car radio offers the facility to adjust cer-
tain settings and functions to your require-
ments and to store these changes with the
aid of DSC (Direct Software Control).
tain settings and functions to your require-
ments and to store these changes with the
aid of DSC (Direct Software Control).
The default settings are selected at the fac-
tory.
tory.
An overview of the factory default settings
is provided below for future reference.
is provided below for future reference.
To alter a programming setting:
•
•
Press DSC.
Select and adjust the functions described
below by means of the rocker and the ENT
key. The status of adjustment is shown on
the display.
below by means of the rocker and the ENT
key. The status of adjustment is shown on
the display.
/
Select function
<< >>
Adjust/call up value
ANGLE
Adjust the display to your
own viewing angle.
own viewing angle.
DIM DAY
Select the display bright-
ness for daylight (Stages 1-
9).
ness for daylight (Stages 1-
9).
DIM NIGHT
Select the display bright-
ness for darkness (Stages
1-9).
The brightness is switched
over automatically by the
headlights.
ness for darkness (Stages
1-9).
The brightness is switched
over automatically by the
headlights.
ON VOL
Select the initial volume.
Use << >> to select the de-
sired initial volume.
If “LAST VOL” is selected,
the initial volume is the
same as that last selected.
Use << >> to select the de-
sired initial volume.
If “LAST VOL” is selected,
the initial volume is the
same as that last selected.
PEAK ON/OFF
Activate/deactivate the dy-
namic volume level display.
namic volume level display.
SHARX
Automatic bandwidth switch-
ing on the FM band.
Where the station density is
high, switch to SHARX ON
with << >>: this largely elimi-
ing on the FM band.
Where the station density is
high, switch to SHARX ON
with << >>: this largely elimi-
nates interference from ad-
jacent stations.
“SHARX ON” is the factory
default setting.
jacent stations.
“SHARX ON” is the factory
default setting.
HICUT
Interference-driven treble
reduction.
Treble frequencies are re-
duced only when interfer-
ence is present. Can be se-
lected from NO HICUT
(OFF) to HICUT 3 (strongest
treble reduction). Decide for
yourself which setting is the
most pleasant.
reduction.
Treble frequencies are re-
duced only when interfer-
ence is present. Can be se-
lected from NO HICUT
(OFF) to HICUT 3 (strongest
treble reduction). Decide for
yourself which setting is the
most pleasant.
FM/AM SENS
Change the sensitivity of the
seek run.
“SENS 1” indicates close re-
ception, “SENS 6” distant
reception.
Select “SENS 1” if you wish
to receive strong stations in
the near range; select
“SENS 6” if you also wish to
receive weaker, distant sta-
tions.
seek run.
“SENS 1” indicates close re-
ception, “SENS 6” distant
reception.
Select “SENS 1” if you wish
to receive strong stations in
the near range; select
“SENS 6” if you also wish to
receive weaker, distant sta-
tions.