Biostar P4TDQ BIOS オーナーマニュアル
P4TDQ BIOS Setup
28
9 Frequency Control
Figure 9. Frequency Control
CPU Clock Ratio
This item allows you to select the CPU Ratio.
Auto Detect PCI Clk
This item allows you to enable / disable auto Detect PCI Clock.
The Choices: Enabled (default), Disabled.
CPU Clock
This
item allows you to select CPU Clock, and CPU over clocking.
If unfortunately, the system’s frequency that you are selected is
not functioning, there are two methods of booting-up the system.
Method 1: Clear the COMS data by setting the JCOMS1 ((2-3) closed))
not functioning, there are two methods of booting-up the system.
Method 1: Clear the COMS data by setting the JCOMS1 ((2-3) closed))
as “ON” status. All the CMOS data will be loaded as
defaults setting.
defaults setting.
Method 2: Press the <Insert> key and Power button simultaneously,
after that keep-on pressing the <Insert> key until the
power-on screen showed. This action will boot-up the
system according to FSB of the processor.
power-on screen showed. This action will boot-up the
system according to FSB of the processor.