Bernina L 220 オーナーマニュアル

1

When using an electrical appliance, basic safety precautions should always be followed, including the 

following: Read all instructions before using this sewing machine.

  1. The appliance should never be left unattended when plugged in.

  2. Always unplug this appliance from the electric outlet immediately after using and before cleaning.

  3. Always unplug before re-lamping. Replace bulb with same type rated 15W (120V), 10W (220-

240V).

  1. Do not use the appliance as a toy. Caution is advised when the appliance is used by children, or 

near children. The appliance is not intended for use by persons (including children) with reduced 

physical, sensory or mental capabilities or lack of experience and knowledge, unless they have 

been given supervision or instruction concerning use of the appliance by a person responsible for 

their safety. To ensure children do not play with the appliance they must be supervised.

  2. Use this appliance only for its intended use as described in this manual. Use only attachments 

recommended by the manufacturer as contained in this manual.

  3. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has 

been dropped or damaged, or dropped into water. Return the appliance to the nearest authorized 

dealer or service center for examination, repair, electrical or mechanical adjustment.

  4. Never operate the appliance with any air openings blocked. Keep ventilation openings of the 

sewing machine and foot control free from the accumulation of lint, dust, and loose cloth.

  5. Keep fingers away from all moving parts. Special care is required around the sewing machine 

needle.

  6. Always use the proper stitch plate. The wrong plate can cause the needle to break.

  7. Do not use bent needles.

  8. Do not pull or push fabric while stitching. It may deflect the needle causing it to break.

  9. Switch the sewing machine off “O” when making any adjustments in the needle area, such as 

threading needle, changing needle, threading looper, or changing presser foot and the like.

10. Always unplug the machine from the electrical outlet when removing covers, when covers are 

opened to thread the loopers, when lubricating or when making any other user servicing adjust-

ments mentioned in the instruction manual.

11.  Never drop or insert any object into any opening.

12. Do not use outdoors.

13. Do not operate where aerosol (spray) products are being used or where oxygen is being adminis-

tered.

14. To disconnect, turn all controls to the off “O” position, then remove plug from outlet.

15. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

16. Basically, the machine should be disconnected from the electricity supply when not in use.

17. If the power cord of this appliance is damaged, it must be replaced with a special cord by your 

nearest authorized dealer or service center.

18. (Except USA/Canada) This machine is provided with double insulation.

 

Use only identical replacement parts. See instructions for servicing Double-Insulated machine.

In a double-insulated product, two systems of insulation are provided instead of grounding. No 

grounding means is provided on a double-insulated product nor should a means for grounding be 

added to the product. Servicing a double-insulated product requires extreme care and knowledge of 

the system and should only be done by qualified service personnel. Replacement parts for a dou-

ble-insulated product must be identical to those parts in the product. A double-insulated product is 

marked with the words DOUBLE INSULATION or DOUBLE INSULATED.

The symbol   may also be marked on the product.

“This cover and chainstitch sewing machine is intended for household use only.”