Belkin F1DD102L ユーザーズマニュアル

13

1

2

3

4

5

6

7

8

section

 

Using the KVM Switch

To modify the hot-key preceding sequence from the default Scroll Lock, you can 
either hit the hot-key sequence: scrlk – scrlk – H – (y), y = SCROLL LOCK, CAPS, 
ESC, F12 or NUM LOCK (as detailed in the Hot-Key Quick Reference Table below).

or

You can use another method: Press and hold the last button to enter the hot-key 
setting mode.  
 
Step 1.  Press and hold the last button (i.e., the second button on the 2-port model 

or the fourth button on the 4-port model) till you hear two beeps. Then 
release the button. 

Step 2.  Within two seconds, you should hit any of the selectable hot-key triggers 

(y), y = SCROLL LOCK, CAPS, ESC, F12, NUM LOCK, LEFT CTRL, or 
RIGHT CTRL to be your hot-key trigger.

For example, if you hit CAPS after hearing the two beeps, then the hot key will be: 
CAPS – CAPS – command key. 
 
For detailed hot-key sequences and their corresponding functional commands, 
please refer to the Hot-Key Quick-Reference Table below. 

Hot Key Quick Reference Table

2-/4-Port SOHO KVM Switch with Audio -- & Mic -- Operation Commands for Hot Keys/Front-Panel Buttons 

Hot-key sequence = [ScrLk] + [ScrLk] + Command key(s)   

* user-definable preceding sequence = SCROLL LOCK, CAPS, F12 or NUM LOCK, LEFT_CTRL, RIGHT_CTRL  

Select Computer Channel 

2

 

(Joint-select PC port/audio  

& mic, if binding is enabled)

ScrLk + ScrLk +  (x)

 

 

(x is a top-row number 

key) x = 1~2  / x = 1~4 

for PC channel no.

Press the computer icon on 

the left of a button to select 

the active computer channel

Select the active computer channel

(Hot key: Joint-select PC port/audio & mic,  

if binding is enabled)

Select Audio & Mic Channel 

2 

(Joint-select PC port and audio 

& mic, if binding is enabled)

ScrLk + ScrLk +  (Fy) 

Fy = F5~F6/Fx=F5~F8 

(Fy is a function key)

--

Select the active audio & mic channel

(Hot key: Joint-select PC and audio & mic channel,  

if binding is enabled)

Audio & Mic Switching 

2

[Default]

ScrLk + ScrLk + Q

--

Enable the binding of PC port and audio & mic 

switching. (Hot key: Once this feature is enabled, any 

computer and/or audio & mic switching by hot keys is 

bound together) (factory default)

Audio & Mic Switching  

2

ScrLk + ScrLk + W

--

Disable the binding of PC port and audio  

& mic switching 

Next lower PC channel 

2

(Joint-select PC/audio & mic, 

if binding is enabled)

ScrLk + ScrLk +  

--

Select the next lower connected PC channel

(Hot key: Joint-select PC/audio & mic, if binding 

is enabled)

Next higher PC channel 

2

(Joint-select PC/audio & mic, 

if binding is enabled)

ScrLk + ScrLk +    

--

Select the next higher connected PC channel

(Hot key: Joint-select PC/audio & mic, if binding 

is enabled)

ScrLk + ScrLk + 

--

Toggle between the previous channel and  

current channel

Press and hold down last 

button (Button 2 / Button 4) 

until you hear three beeps, 

release the button, and then 

press (y) key. This resets 

hot-key preceding sequence 

to SCROLL LOCK.

Select the hot-key preceding sequence among  

6 alternative keys

--

Read the version of firmware that is currently on 

the KVM Switch. This is helpful when a firmware 

upgrade is performed as it gives you the ability to read 

the version of firmware, before and after the upgrade, 

to ensure the firmware has installed correctly.