Behringer X32 DIGITAL MIXER ユーザーズマニュアル

ページ / 70
50
X32 DIGITAL MIXER Preliminary User Manual
7.4.5  Routing Screen: Card Output Tab:
The routing screen’s card tab allows the user to patch various signal paths to 
the physical inputs and outputs of the XUF card. The XUF’s signal path provides 
32 channels of inputs and 32 channels of outputs. The 32 card inputs can be used 
as alternate sources for the two input fader layers, switchable in banks of 8. 
To assign an output path to the option card, perform the following steps:
1.  Adjust the 1st encoder to select which 8-channel output path to send to the 
first 8 outputs of the card. Choices include:
Local 1-8
Local 9-16
Local 17-24
Local 25-32
AES50-A 1-8
AES50-A 9-16
AES50-A 17-24
AES50-A 25-32
AES50-A 33-40
AES50-A 41-48
AES50-B 1-8
AES50-B 9-16
AES50-B 17-24
AES50-B 25-32
AES50-B 33-40
AES50-B 41-48
Card 1-8
Card 9-16
Card 17-24
Card 25-32
Out 1-8 
Out 9-16
P16 1-8
P16 9-16
Aux 1-6/Mon
2.  Tap the 1st encoder to assign the selected output path, 
completing the process. 
3.  Repeat the process with encoders 2-4 to select output paths for the other 
24 channels of card outputs. 
7.4.6  Routing Screen: AES50-A and AES50-B Tabs:
The routing screen’s AES50-A and AES50-B tabs allow the user to patch various 
console output paths to the outputs of the dual AES50 connectors. These AES50 
connectors can feed other AES50 equipped devices such as a digital stagebox or 
standalone multi-track recorder.
The console contains two separate AES50 connectors, an “A” connector and a 
“B” connector. These dual connectors allow for an increased level of flexibility in 
networking the console with various AES50 based equipment. 
Each of the two AES50 screens contains the same following sets of parameters 
that can be adjusted. To assign various console signal paths to the AES50 
connectors, perform the following steps:
1.  Adjust the 1st encoder to select an 8-channel signal path that will be sent to 
the first 8 channels of the AES50 connectors output. Choices include:
Local 1-8
Local 9-16
Local 17-24
Local 25-32
AES50-A 1-8
AES50-A 9-16
AES50-A 17-24
AES50-A 25-32
AES50-A 33-40
AES50-A 41-48
AES50-B 1-8
AES50-B 9-16
AES50-B 17-24
AES50-B 25-32
AES50-B 33-40
AES50-B 41-48
Card 1-8
Card 9-16
Card 17-24
Card 25-32
Out 1-8 
Out 9-16
P16 1-8
P16 9-16
Aux 1-6/Mon
2.  Tap the 1st encoder to connect the currently selected signal path to the 
AES50 pathway.
3.  Repeat the above process for the other five sets of 8-channel AES50 outputs.  
The AES50-B tab works exactly the same as the AES50-A screen, but instead 
selects sources sent to the output of the console’s AES50-B connector.