Baumatic BDF665W ユーザーズマニュアル
o
Turn the water softener cap
anticlockwise and remove it.
anticlockwise and remove it.
o
Pour 0.5 litres of water into the water
softener.
softener.
IMPORTANT: It is only necessary to do this when you fill
the container with salt for the first time.
o
Pour salt into the water softener, using
the funnel that is supplied with the
appliance. You should add
approximately 1.2 kg of salt into the
water softener.
the funnel that is supplied with the
appliance. You should add
approximately 1.2 kg of salt into the
water softener.
o
It is perfectly normal for a small amount of water to come out of
the water softener, whilst you are filling it with salt. This does
not mean that the water softener is filled with the correct
amount of salt.
the water softener, whilst you are filling it with salt. This does
not mean that the water softener is filled with the correct
amount of salt.
o
Refit and fully tighten the water softener cap.
o
The salt required indicator neon will go out approximately 2-6
hours after you have filled the water softener with salt. When
the salt required indicator neon lights on the control panel, then
you should follow the filling with dishwasher salt procedure
again.
hours after you have filled the water softener with salt. When
the salt required indicator neon lights on the control panel, then
you should follow the filling with dishwasher salt procedure
again.
o
IMPORTANT: You do not need to pour 0.5 litres of water
into the container when you subsequently fill the water
softener with salt.
into the container when you subsequently fill the water
softener with salt.
11