Bühler 2895E ユーザーズマニュアル

bühler

Allied Front-End Loader 

- 10 - 

P4493 

 

The tractor must be equipped with an approved Roll 

over Protection Structure (ROPS) and safety belts to help prevent personal injury 
or death caused by tractor roll over. 

 

Maximum rated loader capacity may exceed tractor 

rating.  Load restrictions or reduction in hydraulic operating pressure may be 
required for safe operation. 

Do not exceed the manufacturer’s rating for maximum gross vehicle 

weight.  Refer to the Tractor Manual or the ROPS Serial Decal for rating.  Do not 
alter or modify the ROPS structure. 

Tractor Tires:  Space rear tires as recommended by the tractor manufacturer.  
Tire inflation and capacity must meet or exceed additional weight of loader, 
attachment and payload.  Maximize width for high lift applications.  Tread width 
must not exceed maximum width as recommended in the Mounting Kit Listing. 

 

Add rear ballast to help prevent personal injury or death 

caused by tractor roll over. 

Rear Ballast:  Rear ballast is required to ensure 25% of gross vehicle weight is 
transferred to the rear axle.  Attachment and load must be included as weight. 
Adequate rear weights are required to counterbalance maximum loader capacity 
and safe loader operation.  Weight can be added as rear tire liquid (calcium 
solution), rear wheel weights, rear axle weights and/or three point hitch mounted 
ballast or implement.  Ballasting will vary with tractor and loader attachment.  
Refer to the Tractor Manual for recommended ballasting.