Bühler 2895E ユーザーズマニュアル

bühler

Allied Front-End Loader 

- 15 - 

P4493 

For safe handling of bales and pallets please follow procedures below: 

Do not operate A – Frame for bales without the stabilizers. 

With a single spear, enter one of the ends of 
the bale and drive the spear horizontally into 
the center or slightly above center of the bale 
and fully penetrate the bale.  Then rollback 
the bucket cylinders approximately three 
quarters of the cylinder stroke and lift bale 
approximately a foot off the ground. 

With the double or four spears enter the bale 
from one of the ends and drive the spear one 
third to one half the way up, from the bottom 
and fully penetrate the bale.  Then rollback 
the bucket cylinders approximately three 
quarters of the cylinder’s stroke and lift bale 
approximately 12.0” off the ground. 

Never attempt to use the spears as forks, as the spears can easily penetrate the 
ground causing a spear to bend or break as well as making the bale unstable to 
carry.  Never attempt to handle a bale with only part of the spear(s) penetrated 
The nut on the bale spear must be torqued to 500 ft.-lbs.  Check the torque 
periodically.  A loose spear will damage the spear holder.