Buffalo Technology TeraStation TS-RXL ユーザーズマニュアル

TeraStation User Manual

120

Port Trunking

Click [Modify 

Settings] to 

change settings.

Port Trunking

Enable Port Trunking to use two Ethernet connections to the TeraStation. The 

following configurations are available:

• [Off] : Do not use port trunking.

• [Round-robin policy] : Sets a round-robin policy for fault tolerance and load 

balancing. 

• [Active-backup policy] : Sets an active-backup policy for fault tolerance. 

• [XOR policy] : Sets an XOR (exclusive-or) policy for fault tolerance and load 

balancing.

• [Broadcast policy] : Sets a broadcast policy for fault tolerance. 

• [Dynamic link aggregation] : Sets an IEEE 802.3ad dynamic link aggregation policy. 

• [Adaptive transmit load balancing (TLB)] : Sets a Transmit Load Balancing (TLB) 

policy for fault tolerance and load balancing.

Workgroup/

Domain

Click [Modify 

Settings] to 

change settings.

Authentication Method

Select the method to join the network ([Workgroup], [NT Domain], or [Active 

Directory]).  [Workgroup] is the default.  Networking knowledge is required to 

configure other methods.  Consult your network administrator for details.

Workgroup Name 

To join a workgroup, enter the name of your workgroup. 

*  You can enter up to 23 bytes(UTF-8). 

*  Alphanumeric characters, multi-byte characters, -(hyphen), _(underscore),  and 

.(dot) may be used.

*  Do not use a symbol as the first character.

WINS Server IP Address

Enter the IP address of your WINS server to use WINS Server.

NT Domain Name 

Enter [NT Domain Name] to use [NT Domain] as the method to join the network. 

*  You can enter up to 23 bytes(UTF-8). 

*  Alphanumeric characters, multi-byte characters, -(hyphen), _(underscore),  and 

.(dot) may be used.

*  Do not use a symbol as the first character.

NT Domain Controller 

Name 

Enter [NT Domain Controller Name] to use [NT Domain] as a method to join 

the network.  Register the computer account which has the same name as the 

TeraStation to the Domain Controller.

* You can enter up to 63 bytes(UTF-8). Do not use multi-byte characters. 

*  Alphanumeric characters, -(hyphen),  and  _(underscore) may be used.

*  Do not use a symbol as the first character.

Active Directory 

Domain Name 

(NetBIOS Name)

Enter [Active Directory Domain Name (NetBIOS Name)] to use [Active Directory] as a 

method to join the network.

* You can enter up to 23 bytes(UTF-8). 

*  Alphanumeric characters, multi-byte characters, -(hyphen), _(underscore),  and 

.(dot) may be used.

*  Do not use a symbol as the first character.

Active Directory 

Domain Name (DNS/

Realm Name)

Enter [Active Directory Domain Name (DNS/Realm Name)] when selecting [Active 

Directory] as a method to join the network.

*  You can enter up to 255 bytes(UTF-8). Do not use multi-byte characters. 

*  Alphanumeric characters, -(hyphen), _(underscore),  and .(dot) may be used.

Administrator 

Password

Enter [Administrator Password].

*  This must be entered if [NT Domain] or [Active Directory] is selected for 

[Authentication Method].

*  You can enter up to 256 bytes(UTF-8).  Do not use multi-byte characters. 

*  Alphanumeric characters, -(hyphen), and _(underscore) may be used.

* Do not use a symbol as the first character.