Britax FRONTIER 85 ユーザーズマニュアル
24
25
To remove the Versa-Tether from the storage clip:
Remove the webbing from the
1
elastic strap and loosen the
Versa-Tether.
Remove the Versa-Tether
2
®
hook from the storage clip.
To attach the Versa-Tether to the storage clip or a tether
anchor:
Firmly press the hook over the
1
storage clip or tether anchor
point.
Always attach the hook over
2
the anchor point.
IMPORTANT: Use the elastic strap
to contain extra webbing. Always
ensure any excess webbing is
contained within your vehicle.
Using the Versa-Tether
WARNING!
Attach the Versa-Tether only to tether anchors identified by
•
your vehicle manufacturer as tether anchorage points.
If your vehicle does not currently have a tether anchor
If your vehicle does not currently have a tether anchor
•
attachment, refer to your vehicle owner’s manual or
contact your vehicle man u fac tur er for assistance. DO
NOT modify your vehicle without advice from your vehicle
manufacturer.
When using the child seat in harness mode:
Britax recommends that the tether be used at all times
•
when installing the child seat. Using the tether will improve
the stability of your child seat and reduce the risk of injury.
You must
You must
•
always use the Versa-Tether for children
weighing 65 – 85 lbs (29.5 – 38.6 kg).
Tether anchor locations vary
from vehicle to vehicle. Check
your vehicle owner’s manual
and look for the tether anchor
symbol shown in the diagram
to help identify where the top
tether anchor point is located
in your vehicle.
OR
OR
OR
OR
Child Seat Functions
Child Seat Functions