Britax FRONTIER 85 ユーザーズマニュアル

Detach the Versa-Tether

hook

from the storage clip.
Ensure the positioning block

is rotated to the back.

Place the child seat on the

vehicle seat and connect the

LATCH connectors to the

vehicle LATCH anchors.

Push the child seat into the

vehicle seat and pull the end

of each LATCH strap through

the belt slot to remove slack.

Repeat as necessary. Store

excess webbing behind cover.

Using LATCH

Positioning the Child Seat: Booster Mode

Before you begin:

Does your vehicle have a top tether anchor in the chosen seating

position?
Does your vehicle have LATCH anchors in the chosen seating position?

9
IMPORTANT: Use LATCH only to position this child seat to your vehicle
seat. Secure your child using the vehicle’s lap-shoulder belt system.

WARNING!

Position forward-facing

•

only in a seating position with a

lap-shoulder belt.
Use

•

only the vehicle’s lap and shoulder belt system when

securing a child in booster mode.

Never secure a child

with a lap belt only in booster mode.
Always

•

secure the unoccupied child seat.

If the LATCH anchors in your vehicle prevent proper

•

vehicle belt fit across your child you cannot use LATCH to

position this seat in booster mode. See below.

The vehicle belt fits properly

when the lap part sits low across

the child’s hips (a) and the

shoulder part lies across the

child’s shoulder and does not

contact the child’s neck when

routed through the upper belt

guide (b).