Bowflex 3000 ユーザーズマニュアル

Assembly Manual

    •   TreadClimber

® 

Base and Treadle assembly from Step 4

    •  (1) Left Upright Support & Hydraulic Cylinder
    •  (1)  Right Upright Support & Hydraulic Cylinder

    •  (2) 5/16” x 1” Button Head Screws

    •  3/16” Hex Key

5-1   Screw a 5/16” x 1” button head screw half way into the 

outside of the left and right lower upright brackets of the 
base assembly (See Figure 5-1).

5-2   Put the left upright on the left upright bracket (See Figure 

5-2) so that it rests on the button head screw (See Figure 
5-3). The cylinder bracket will be at the top and face the 
rear of the machine.

Note:  Make sure the decal on the upright support faces outward from 

the machine.

5-3   Repeat on the opposite side.