Bosch Appliances Home Care Product F.01U.252.722 ユーザーズマニュアル
16
en | Installation
NurseCall Relay Unit
F.01U.252.722 | V1 | 2011.12
User Manual
Bosch Security Systems
3.2.6
Setting the jumpers on the communication board on the Relay Plus Unit
1.
Disassemble the unit; see Section 6.5.1 Disassembling the unit, page 29.
2.
Remove the communication board; see Section Removing the communication board,
3.
Set the jumpers as required in your configuration. By default the jumpers are set for
connection to a Display Zettler.
Setting the jumpers for a Display Zettler:
Setting the jumpers for a printer setup or a Display Norsk:
4.
Assemble the communication board and the unit. This is basically the reverse of the
disassembling procedure, see Section 6.5.1 Disassembling the unit, page 29.