Baratza Forte-AP ユーザーズマニュアル

ページ / 20
Forte
TM
 Manual
10
Setting the Macro and Micro Adjustment
The Forté
TM
 must be running when  
grind adjustment are made.
Micro
Adjustment 
A-Z
Macro
Adjustment 
1-10
Partially ground coffee beans may 
remain between the burrs when the 
grinder is turned off. When making 
ANY grind adjustment, the grinder 
must be running.
Normal Grinding 
Operation
Move the Macro lever (right side) up or 
down, to the desired grind setting.  Set 
the Micro adjustment lever (left side) 
to the middle of the scale.
Starting brew settings can be found at 
www.baratza.com under the Support 
tab.
Grind a small amount of coffee into the bin by pressing WEIGHT, then M (manual), 
and then the START button.  Press STOP after 5g of coffee have been ground.  
Check the particle size.  If the particle size is close to what you desire, use the 
Micro lever to fine-tune the grind size.  If the particle size needs a big change, 
then adjust the Macro lever to a new position.
The full range on the Micro scale is equal to one “click” or position change on 
the Macro scale.  Adjusting levers UP produces a smaller particle size, adjusting 
levers DOWN produces a larger particle size.