West Bend SHIR100 - Iron オーナーマニュアル

 

6 

Silk and 
Synthetics 

•Silk/Synth

 

None None Yes 

Wool 

••Wool

 

Yes None 

Yes 

Cotton 

•••Cotton

 

Yes None 

Yes 

Linen 

Linen 

(Max) 

Yes Yes Yes 

 

 

1.  Disconnect the power cord from the outlet. Let the iron cool completely.  

2.  Empty any water left in the water tank and wipe the soleplate with a damp cloth. 

Please note: if using starch, it should be sprayed on the reverse side of 
the fabric and the soleplate cleaned more frequently.  

3.  Clean the upper part of the iron with a damp cloth.  

4.  Wind the cord loosely around the cord wrap.  

5.  Store the iron horizontally on a stable surface and use a cloth to protect the 

soleplate.  Do not let the soleplate sit on or rub against any metal materials.  

 

1.  Do this function where you have close access to a sink. 

2.  Fill the water tank to the Max Fill level and plug in the iron.  Set the temperature 

dial to the Linen/Max position.  A blue light will illuminate showing the iron is 
“On.”  Make sure the steam control dial is in the dry position. 

3.  When the iron is heated, hold it over a sink and move the steam control dial 

backwards to the “Self Clean” position, exerting a little force.  Hold the dial in 
this position during cleaning.  Steam and boiling water will come out of the 
soleplate flushing out impurities and flakes (if any). 

4.  Release the dial when all the water is completely emptied from the iron. 

5.  Let the iron cool then wipe the soleplate with a damp cloth and store as directed 

in the “After Ironing” section above (#5). 

 

Auto-decalcification Feature:  There is a decalcification box inside this appliance 
that greatly reduces the formation of calcium deposits.