West Elm Wavy Table Lamp 組み立て手順

page 1 of 1

assembly instructions

7540768/7540735 - 12/05

: wavy table lamp

1. Press the sides of the harp (A) together in order to slide into slots in saddle (B).

2. Place shade on harp and secure by tightening cap nut (C) onto threaded rod.

3. Screw in lightbulb.

Use with a type A bulb. DO NOT USE WITH A BULB EXCEEDING 100 WATTS.

Electric bulb should be centered inside the shade, making sure it does not touch the sides of the shade.

CARE INSTRUCTIONS.

Hardware may loosen over time. Periodically check that all connections are tight.

Wipe base with a soft, dry cloth. To protect the finish, avoid the use of all chemicals and household cleaners.