West Elm Pleated Shade Floor Lamp 組み立て手順

Important Safety Instructions:

·For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the

plug does not fit securely into your outlet, do not force it-contact a professional electrician. Use the plug with

an extension cord only if it can be fully inserted into the cord's socket. Never alter the plug in any way.

·These instructions are provided for your safety. It is important that they are read carefully and completely

before assembling fixture.

·This fixture has been rated for up to (1) 100-watt maximum type A bulb (not included). To avoid the risk of

fire, do not exceed the recommended wattage.

assembly instructions

pleated shade floor lamp

5781406 - 03/08

page 1 of 1

Warning:

·To reduce the risk of fire, electrical shock or personal injury, always turn off

and unplug lamp and allow it to cool prior to replacing light bulb.

·Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.

·Keep flammable materials away from lit bulb.

Pre-assembly:

·Remove all parts and hardware from box along with any plastic protective packaging.

·Do not discard any contents until after assembly is complete to avoid accidentally discarding small

parts or hardware.

Parts enclosed:

•(1) Socket ring (K)

•(1) Socket (I)

•(1) Shade (J)

•(1) Base (A)

•(1) Pole (D)

•(1) Pole (F)

•(1) Pole (G)

•(1) Handle (H)

•(2) Screw (B,C)

Care instructions:

·Clean with soft, dry cloth.

·Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the lamp.

Assembly Instructions:

1. Insert the pole (D) into the base (A) , insert screw (B) and

tighten with a screwdriver.

2. Screw the pole (F) onto the pole (D)

3. Insert the pole (G) into the pole (F), insert screw (C) and

tighten with a screwdriver.

4. Screw the handle (H) onto the tube (G).

5. Screw off the ring (K) from the socket (I).

6. Put the shade (J) onto the socket (I) and screw on the ring (K).

5. Insert one 100-watt maximum type A bulb (not included) into

the socket.

6. Plug into the proper electrical outlet and test fixture.