West Elm Metal Floor Lamp With Glass Table 組み立て手順
Important Safety Instructions:
·For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the
plug does not fit securely into your outlet, do not force it-contact a professional electrician. Use the plug with
an extension cord only if it can be fully inserted into the cord's socket. Never alter the plug in any way.
·This instruction is provided for your safety. It is important that they are read carefully and completely before
assembling fixture.
·This fixture has been rated for up to (1) 150-watt TYPE A standard bulb (not included). To avoid the risk
of fire, do not exceed the recommended wattage.
·For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the
plug does not fit securely into your outlet, do not force it-contact a professional electrician. Use the plug with
an extension cord only if it can be fully inserted into the cord's socket. Never alter the plug in any way.
·This instruction is provided for your safety. It is important that they are read carefully and completely before
assembling fixture.
·This fixture has been rated for up to (1) 150-watt TYPE A standard bulb (not included). To avoid the risk
of fire, do not exceed the recommended wattage.
assembly instructions
metal floor lamp with glass table
9509746
page 1 of 1
Warning:
·To reduce the risk of fire, electrical shock or personal injury, always turn off
and unplug lamp and allow it to cool prior to replacing light bulb.
·Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
·Keep flammable materials away from lit bulb.
·To reduce the risk of fire, electrical shock or personal injury, always turn off
and unplug lamp and allow it to cool prior to replacing light bulb.
·Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
·Keep flammable materials away from lit bulb.
Pre-assembly:
·Remove all parts and hardware from box along with any plastic protective packaging.
·Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.
Parts and hardware enclosed:
(1) Finial (A)
(1) Lamp Shade (B)
(1) Harp (C)
(2) Harp Caps (D)
(1) Saddle (E)
(1) Pole (F)
(1) Pole (G)
Parts and hardware enclosed:
(1) Finial (A)
(1) Lamp Shade (B)
(1) Harp (C)
(2) Harp Caps (D)
(1) Saddle (E)
(1) Pole (F)
(1) Pole (G)
(1) Glass Table (H)
(1) Pole (I)
(1) Leg (J)
(1) Leg (K)
(4) Allen Screw (L)
(1) Allen Key (N)
(1) Socket (O)
(1) Pole (I)
(1) Leg (J)
(1) Leg (K)
(4) Allen Screw (L)
(1) Allen Key (N)
(1) Socket (O)
Care instructions:
·Clean with soft, dry cloth.
·Always avoid the use of harsh chemicals or abrasive cleaners
as they may cause damage to the lamp.
Assembly Instructions:
1. Align Screw Holes (M) on Leg (K) and Leg (J).
2. Insert Allen Screws (N) onto the Screw Holes (M) and tighten to secure
with Allen Key (N).
3. Screw Pole (I ) onto Leg (J).
4. Insert the Glass Table (H), onto Pole (I).
5. Screw Pole (G) onto the Pole (I).
6. Screw Pole (F) onto the Pole (G).
7. Insert the Harp (C), into the Saddle (E), and lower the two
Harp Caps (D) until they cover the two-pronged saddle.
8.Unscrew the finial (A) from the harp top (C). Place shade (B) over
the assembled harp, making sure the top extends through the hole
at the top of the shade.
9. Attach the finial (A) and tighten to secure the shade.
4. Insert a bulb – Max 150 Watt (Type A) Standard (not included)
into the socket (O).
C
B
E
A
B
B
C
D
E
F
F
G
H
I
J
K
L
N
M
O