West Elm Ceramic Cube Floor Lamp 組み立て手順
Important Safety Instructions:
·For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the
plug does not fit securely into your outlet, do not force it-contact a professional electrician. Use the plug with
an extension cord only if it can be fully inserted into the cord's socket. Never alter the plug in any way.
·This instruction is provided for your safety. It is important that they are read carefully and completely before
assembling fixture.
·This fixture has been rated for up to (2) 60-watt TYPE A standard bulb (not included). To avoid the risk of
fire, do not exceed the recommended wattage.
·For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the
plug does not fit securely into your outlet, do not force it-contact a professional electrician. Use the plug with
an extension cord only if it can be fully inserted into the cord's socket. Never alter the plug in any way.
·This instruction is provided for your safety. It is important that they are read carefully and completely before
assembling fixture.
·This fixture has been rated for up to (2) 60-watt TYPE A standard bulb (not included). To avoid the risk of
fire, do not exceed the recommended wattage.
assembly instructions
ceramic cube floor lamp
1833847
page 1 of 1
Warning:
·To reduce the risk of fire, electrical shock or personal injury, always turn off
and unplug lamp and allow it to cool prior to replacing light bulb.
·Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
·Keep flammable materials away from lit bulb.
·To reduce the risk of fire, electrical shock or personal injury, always turn off
and unplug lamp and allow it to cool prior to replacing light bulb.
·Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
·Keep flammable materials away from lit bulb.
Pre-assembly:
·Remove all parts and hardware from box along with any plastic protective packaging.
·Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.
Parts enclosed:
(1)Ceramic Lamp Base(A)
(1) Pole (B)
(1) Socket (C)
(1) Socket (D)
(1) “C” WIRE (E)
(1) Lamp Shade (1)
(1) Socket Ring (1)
Parts enclosed:
(1)Ceramic Lamp Base(A)
(1) Pole (B)
(1) Socket (C)
(1) Socket (D)
(1) “C” WIRE (E)
(1) Lamp Shade (1)
(1) Socket Ring (1)
Assembly Instructions:
1. Inset the bulb Max 60-watt TYPE A onto the Socket(C)
2. Screw the Pole(B) Onto the Ceramic Base (A)
3. Unscrew the Socket Ring (G) from the Socket (D)
4. Place the Lamp Shade (F) onto the Socket (D) and slide the “C” Wire (E) Clip onto the
Pole (B)
5. Screw Socket Ring (G) onto the Socket (D) and tighten the shade
6. Inset the bulb Max 60-watt TYPE A onto the socket (D)
Care instructions:
·Clean with soft, dry cloth.
·Always avoid the use of harsh chemicals or abrasive cleaners as they may
cause damage to the lamp.