West Elm Antler Table Lamp 組み立て手順
page 1 of 1
assembly instructions
8443988/8361669/8361776 - 08/06
antler table lamp
Important Safety Instructions:
·For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the plug does not fit
securely into your outlet, do not force it-contact a professional electrician. Use the plug with an extension cord only if it can
be fully inserted into the cord's socket. Never alter the plug in any way.
·These instructions are provided for your safety. It is important that they are read carefully and completely before assembling
fixture.
·This fixture has been rated for up to (1) 3-way 150-watt maximum TYPE A standard bulb (not included). To avoid the risk of
fire, do not exceed the recommended wattage.
·For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the plug does not fit
securely into your outlet, do not force it-contact a professional electrician. Use the plug with an extension cord only if it can
be fully inserted into the cord's socket. Never alter the plug in any way.
·These instructions are provided for your safety. It is important that they are read carefully and completely before assembling
fixture.
·This fixture has been rated for up to (1) 3-way 150-watt maximum TYPE A standard bulb (not included). To avoid the risk of
fire, do not exceed the recommended wattage.
Warning:
·To reduce the risk of fire, electrical shock or personal injury, always turn off
and unplug lamp and allow it to cool prior to replacing light bulb.
·Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
·Keep flammable materials away from lit bulb.
·To reduce the risk of fire, electrical shock or personal injury, always turn off
and unplug lamp and allow it to cool prior to replacing light bulb.
·Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
·Keep flammable materials away from lit bulb.
Pre-assembly:
·Remove all parts and hardware from box along with any plastic
protective packaging.
·Do not discard any contents until after assembly is complete to avoid
accidentally discarding small parts or hardware.
·Remove all parts and hardware from box along with any plastic
protective packaging.
·Do not discard any contents until after assembly is complete to avoid
accidentally discarding small parts or hardware.
Parts enclosed:
(1) Finial (A)
(1) Harp Top (B)
(1) Harp (C)
(2) Harp Caps (D)
(1) Socket (E)
(1) Saddle (F)
(1) Finial (A)
(1) Harp Top (B)
(1) Harp (C)
(2) Harp Caps (D)
(1) Socket (E)
(1) Saddle (F)
Assembly Instructions:
1. Insert the harp (C) into the saddle (F), and lower the two harp
caps (D) until they cover the two-pronged saddle.
2. Unscrew the finial (A) from the harp top (B). Place shade
1. Insert the harp (C) into the saddle (F), and lower the two harp
caps (D) until they cover the two-pronged saddle.
2. Unscrew the finial (A) from the harp top (B). Place shade
over the assembled harp, making sure the top extends through
the hole at the top of the shade.
3. Attach the finial and tighten to secure the shade.
4. Insert a bulb – Max 3-way 150 Watt (Type A) Standard (not
included) into the socket (E).
5. Plug into the proper electrical outlet and test fixture.
the hole at the top of the shade.
3. Attach the finial and tighten to secure the shade.
4. Insert a bulb – Max 3-way 150 Watt (Type A) Standard (not
included) into the socket (E).
5. Plug into the proper electrical outlet and test fixture.
Care instructions:
·Clean with soft, dry cloth.
·Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the lamp.
·Clean with soft, dry cloth.
·Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the lamp.