HP ProLiant DL160 G6 E5504 2.0GHz Quad Core Non Hot Plug SATA Rack Server 490427-421 ユーザーズマニュアル

The HP ProLiant DL160 G6 server is a high performance, low cost, ultra-dense, dual processor capable, 1U rack server for memory
intense High Performance Computing (HPC) environments, Web 2.0, hosting, and general large memory footprint server
deployments.

Processors:

Supports up to two Intel® Quad-Core 5500 sequence processors

Quad-Core Intel® Xeon® processors 5500 sequence with 8 MB Level 3 cache

Intel® 5520 Chipset

Memory:

Up to 192GB, using 16GB Quad-Rank PC3-8500R-7 DDR3 Registered (RDIMM) memory, operating at 800MHz when
populated at 2 DIMMs per Channel in 12 slots.
Up to 144GB, using PC3-10600R or PC3-8500R DDR3 Registered (RDIMM) memory, operating at 800MHz when
populated at 3 DIMMs per Channel in 18 slots.
Up to 24GB, using PC3-10600E DDR3 Unbuffered (UDIMM) memory, operating at 1066MHz when populated at 2
DIMMs per Channel in 12 slots.

Internal Drive Support:

Support for up to four 3.5" Non-Hot plug serial ATA (SATA) hard drives or

NOTE: Embedded SATA controller support transfer rate up to 3Gb/s SATA.

Support for up to four 3.5" Hot plug Serial Attached SCSI (SAS) or SATA hard drives.

NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (512181-B21) is required if ordering third or fourth Hard Drives
for Hot Plug models only.

Support for 2.5" Hot Plug Serial Attached SCSI (SAS) or SATA hard drives.

NOTE: Installation of the HP 8SFF Hard Drive Cage & Backplane G6, FIO (515938-B21) is required if ordering 2.5"
Hot Plug hard drives.

Internal storage capacity of up to 4.0TB (4 x 1TB Hot Plug 3.5" SATA/SAS), 3.0TB (4 x 750GB Non-Hot Plug SATA)
or 4.0TB (8 x 500GB Hot Plug 2.5" SATA/SAS)

Network Controller:

HP NC362i Integrated Dual Port Gigabit Server Adapter

Storage Controllers:

Non-Hot Plug SATA Models: HP Embedded SATA RAID Controller (RAID 0, 1, 10)

NOTE: Transfer rate: up to 3 Gb/s SATA.
NOTE: To enable RAID functionality on Embedded SATA, use the HP Smart Array B110i SATA Raid controller. To
enable use of the B110i, enter the ROM Based Setup Utility (RBSU). The option for enabling RAID can be functionality
found in the Advanced section of the RBSU.

Hot Plug SAS/SATA Models: HP P410 Smart Array Controller RAID 0,1,10, 5

NOTE: Transfer rate: up to 3Gb/s.

Expansion Slots:

Non-Hot Plug Models: Up to two available PCI Express 2.0 slots:

Slot 1: full-length/full-height PCI-Express 2.0 x16 or
Slot 1: half-length/full-height PCI-Express 2.0 x16
Slot 2: low-profile internal only PCI-Express 2.0 x4 (x8 mechanically)

Hot Plug Models: One available PCI-Express slot:

Slot 1: half-length/full-height PCI-Express 2.0 x16
Slot 2: low-profile internal only PCI-Express 2.0 x4 (x8 mechanically) - slot populated by the SAS/SATA storage
controller – HP Smart Array P410 Controller

Infrastructure Management:

HP Insight Control suite for Linux (IC-Linux), a product option, delivers essential infrastructure management that can help
save time and money by making it easy to deploy, monitor, control and optimize your IT infrastructure through a single,
simple management console. The IC-Linux suite supports Linux-based servers and management consoles
HP ProLiant Onboard Administrator Powered Lights-Out 100i with optional LO100i Advanced Licenses for Virtual KVM
and Virtual Media.
The HP ProLiant Easy Set-up CDs and ISO image downloads offer Assisted and Manual single server installation, setup,

QuickSpecs

HP ProLiant DL160 Generation 6

Overview

DA - 13247   Worldwide QuickSpecs — Version 11 — 11.16.2009

Page 2