White Outdoor ZT-2150 ユーザーズマニュアル

ページ / 56
7
SECTION 3:  KNOW YOUR Z-SERIES
NOTE: Reference to right or left hand side of the mower is observed from the operating position.
Figure 1  
Read this operator’s manual and safety rules before 
operating your Z-Series. Compare the illustrations in 
this manual with your unit to familiarize yourself with the 
location of various controls and adjustments. 
Reference to right or left hand side of the unit is 
observed from the operating position. Save this manual 
for future reference. See Figure 1.
Ignition/Light Switch
The ignition/light switch is located on the right control 
panel and it is used to start the engine. Insert key into 
the ignition switch and turn clockwise to the START 
position. Release key to the ON position once engine 
has fired.The ignition switch is also used to operate the 
headlights when the switch is in the ON/LIGHT position. 
See Figure 1 and Figure 2.
Hour Meter
The hour meter is located on the right control panel and 
the meter’s display stays on continuously. The hour 
value is the number of hours of engine’s operation. Use 
the hour value to determine when maintenance is 
required. See Figure 1 and Figure 2.
Figure 2
Throttle Lever And
 
Choke Lever
Drive Handles
Indicator Panel
Brake
Pedal
Parking
Brake Pedal 
Speed Control Bar
Right Control
Panel 
Lift Handle
Front
Hour Meter
Ignition/Light Switch
PTO Switch
Start
On/
Light
On
Off