Westinghouse 37" 1080P LCD HDTV VR-3725 ユーザーガイド
20
PC Settings
Horizontal Position
0
0
Auto Adjus
t Automatically adjust Clock, Phase, H-Position and V-Position settings.
In order to get a good result, you should open a“filling the screen”picture before executing
Auto Adjust.
Auto Adjust.
Horizontal Position
Shift the screen slightly to
Vertical Position
Shift the screen
Clock
Adjust the DB15 picture signal
sampling clock rate.
Phase
Adjust the
value maybe result the interference.
Reset
Reset the parameters of current menu to default value.
left or right.
slightly up or down.
Db15 picture signal sampling phase. It maybe affect the definition . Wrong
.
: Move
PC Settings Menu is aviliable only in PC DB15
or DVI mode. When DVI signal input, only
Horizontal.
Position and Vertical Position can be adjusted.
or DVI mode. When DVI signal input, only
Horizontal.
Position and Vertical Position can be adjusted.
Press ▼/▲ to highlight one of the following
options, then press ENTER to select it.
options, then press ENTER to select it.
Advanced Picture Settings
Dynamic
Contrast
Off/Low/Medium/High
Film Mode
Off/On
Noise Reduction
MPEG Noise Reduction
Off/Low/Medium/High
Off/Low/Medium/High
: Move
Press
▼/▲
to highlight the item and press
ENTER or
►
to display the sub-menu as
following.
T
he system will adjust the luminance curve
by analyzing the picture content
dynamically.
dynamically.
For the 2:2 or 3:2 format signal of cinema ,
enable special pixel process to reduce the
flick of
enable special pixel process to reduce the
flick of
moving
area.
You can clear up analog TV signal by reducing the dot noise. This feature is not
available at PC or Media source.
available at PC or Media source.
Similar with the Noise Reduction, you can set to reduce the block noise.
The On-Screen Menu