Western Digital My Cloud EX2 ユーザーズマニュアル

GETTING STARTED

10 

WD MY CLOUD EX2 PERSONAL CLOUD STORAGE
USER MANUAL

You’ll need a phillips-head screwdriver for this procedure.

The power and network cables are not connected when you do this.

1.   Press the indented button on the door (top) of the device and open the top.

2.   Remove the bracket

 

that will hold the drives in place.

3.   Using a screw from the bag, attach a plastic tab to the top hole in the drive’s side (on the 

right if the green board is facing you). 

4.   Insert a screw in the corresponding hole on the other side of the drive.

5.   Attach labels 1 or 2 to the top of the drive. Label 1 is on the left and label 2 is on the 

right, when looking down on the top of the unit. There are corresponding numbers on 
the cross brace label.

6.   When looking down on the top of the unit with the front panel towards you, and with the 

connectors at the bottom of the drive facing in, gently slip the drive into a slot.

7.   Make sure the tab is sticking up at the back of the unit.

Bracket

Screw

Tab

Replacement
drive

Green board
facing in

Label