Western Digital My Cloud EX2 ユーザーズマニュアル

MANAGING STORAGE ON WD MY CLOUD EX2

86 

WD MY CLOUD EX4 PERSONAL CLOUD STORAGE
USER MANUAL

12.   Review the warning screen, and then click Finish.

13.   The requested hard drive changes begin. Do not turn off your WD My Cloud EX2 

device while these changes are in progress.

14.   When the process is complete, click Finish again.

Auto-Rebuilding your RAID

The Auto-Rebuilding option allows you to automatically rebuild the RAID for your 

 

WD My Cloud EX2 device in case of drive corruption. Use the following steps to enable the 
auto-rebuild option.

1.   On the navigation bar, click Storage to display the Storage screen.

2.    Click RAID, if not already selected.

3.    Review the Auto-Rebuild field to determine whether your WD My Cloud EX2 device is 

currently set up for auto-rebuild.



If Auto-Rebuild is off, click the toggle button 

 to enable Auto-Rebuild.

The Disk Status screen identifies the health of the disk drives as well as the status and 
information on each drive used in your WD My Cloud EX2 device. The Disk Status screen 
consists of the following areas:



Disks Profile: This area displays the general status of all of the disk drives on your 
device.