Western Digital Mirror Edition ユーザーズマニュアル

MY BOOK MIRROR EDITION

USER MANUAL

SETTING UP – 8

Setting Up

1. Turn on your computer and wait for the operating system to load.

2. Insert the software CD into the CD-ROM drive.

3. The CD autoruns. Click Accept in the terms of agreement screen and WD Drive 

Manager and drivers are installed automatically. WD Drive Manager enables the 
capacity gauge and Safe Shutdown

™ 

and also installs WD RAID Manager.

Note: If AutoPlay is disabled on your computer, you must install the utilities 
manually. Go to the desktop. Double-click My Computer, My Book folder, 
WD_Windows_Tools folder, and Setup.exe. Then run the CD which installs the 
drivers.

4. The Application Installer screen displays a list of options including software, 

documentation, and a registration link. All applications are selected by default. 
Deselect any applications you do not want to install, then click Start. Or, click 
Cancel to exit and no applications will be installed.

5. Connect the adapter’s DC cable plug to the DC power input at the rear panel of 

the product. Verify that plug type of your wall power adapter is the correct plug 
type for your region. If incorrect, remove it and install the correct one.

6. Connect the wall adapter to your AC power receptacle.

7. Plug one end of the USB interface cable into an available port on your computer.

8. Plug the other end of the interface cable into the device, after which the unit 

mounts to the system. 

The WD Drive Manager icon appears in the system tray.

Note: If Windows prompts for additional drivers, allow it to perform its search.

Note: To change the format of the device to RAID 0, follow the instructions in 
“WD RAID Manager for Windows” on page 13.

Important: You must first install WD Drive Manager on the included CD before 
connecting the unit. Follow the steps below to safely connect the device.