Western Digital Mirror Edition ユーザーズマニュアル
MY BOOK MIRROR EDITION
USER MANUAL
REPLACING A DRIVE – 22
Replacing a Drive
My Book Mirror Edition is a limited user-serviceable product which allows for
servicing of one or both internal hard drives in the enclosure.
servicing of one or both internal hard drives in the enclosure.
In the event a fault occurs and you would like to service the device yourself, visit WD
Technical Support at
Technical Support at
and search the knowledge base article 1709
for detailed instructions on obtaining a replacement drive. When contacting Technical
Support, have the following items ready: My Book serial number, date of purchase,
and the serial number of the internal hard drive(s) which require replacement. Once
you have received the replacement drive(s), follow the steps below to service the
dual-drive storage system.
Support, have the following items ready: My Book serial number, date of purchase,
and the serial number of the internal hard drive(s) which require replacement. Once
you have received the replacement drive(s), follow the steps below to service the
dual-drive storage system.
Before getting started, power off the unit and disconnect all of its cables.
1. Place the unit on a clean and stable surface.
2. Using your thumb, firmly push down on the top front panel of the unit to release
the latch and open the cover.
Important: Only WD Caviar
®
GP hard drive assemblies can be inserted into the
My Book Mirror Edition enclosure.
Important: To avoid electrostatic discharge (ESD) problems, ground yourself by
touching the metal chassis of the computer before handling the device.
touching the metal chassis of the computer before handling the device.
9