Wilife V2.5 ユーザーズマニュアル

  

User 

Guide 

83 

5)  Specify the camera(s) you want involved with this event and set camera alert properties for each 

participating camera by double-clicking on the camera line or clicking the Edit button.  (The Camera 

Alert Properties screen allows you to specify the type of message you want to receive, the length of 

time between motion alerts, and the number of alerts.) 

6)  Click OK to save your new "No Motion" alert event. The Recording and Alerts Schedule Screen will 

display the new event. Its color is gray. 

Set Manual Alert Properties 

The Manual Alert Properties screen allows you to view, set and edit alert properties for each camera on the 

network   message type, length of motion filter, and frequency of alert notifications.  These properties tell 

Command Center how to send alert notifications when you manually activate them in the Alerts Scheduler 

Front Control Panel.  You can also edit camera properties by clicking on the Edit button. 

Use the illustration below as a guideline for completing the screen: 

Arm Event Early Properties 

The "arming an event early" feature is accessible from the Live and 

Playback screens via the Alerts Scheduler Front Control Panel.  

Using the Alerts Scheduler Front Control Panel, you can also 

immediately arm manual alerts, disable an active alert, or access the 

Recording and Alerts Schedule. 

If an alert has not been armed, the Front Control Panel will display 

"Alerts Not Armed," as shown in the graphic on this page.   
Simply select the option "Arm Manual Alerts Now" (which activates 

alerts until you manually turn them off) or "Arm <name of scheduled event> Early."  Alerts are now armed.  
The functions you can expect from the Alerts Scheduler Front Control Panel are described below:         

A

LERTS 

N

OT 

A

RMED

 

When you first install WiLife Command Center, the Front Control Panel will display "Alerts Not Armed" until 1) 

you have set up your email server; 2) you have scheduled an alert event in Scheduler; and 3) you select "Arm 

Manual Alerts Now" or "Arm <name of event> Early."