Viessmann VITOTROL 100 操作ガイド
29
Wireless receiver on the boiler
8
A
B
Q ë r w
A LED
1. Press B on the wireless receiver for
approx. 10 s until LED r flashes.
2. Open the flap of the Vitotrol 100.
3. Press twice
.
4. Select with / "SETTINGS".
5. Confirm with OK.
6. Select with / "Service".
7. Confirm three times with OK.
8. Select with / "Address code".
9. Confirm with OK.
After approx. 30 s the display shows
"Transmitting".
The transfer takes approx. 30 s.
During the transfer, the LED flashes
briefly .
"Transmitting".
The transfer takes approx. 30 s.
During the transfer, the LED flashes
briefly .
Once the address code is recognised,
the LEDs go out; otherwise repeat the
procedure.
the LEDs go out; otherwise repeat the
procedure.
What to do if...
Changing the address code
5592 620 GB