Swisher 11730 ユーザーズマニュアル
Step 6:
Attach the Mounting Weldment (23) to the Spreader Assembly by
putting the U-Bolts (26) over the Mounting Tubes (21 & 22) and into
the holes on the Mounting Weldment (23). Mount the Support
Weldment (27) onto the rear of the Mount Weldment (23) and place
the Washers (27) onto the Bolts (26) as shown and thread the Nuts (10)
in place. Making sure that the support tubes are resting on the lip
provided, tighten the nuts, securing the Mounting Weldment (23) and
Support Weldment (27) to the Spreader Assembly.
Attach the Mounting Weldment (23) to the Spreader Assembly by
putting the U-Bolts (26) over the Mounting Tubes (21 & 22) and into
the holes on the Mounting Weldment (23). Mount the Support
Weldment (27) onto the rear of the Mount Weldment (23) and place
the Washers (27) onto the Bolts (26) as shown and thread the Nuts (10)
in place. Making sure that the support tubes are resting on the lip
provided, tighten the nuts, securing the Mounting Weldment (23) and
Support Weldment (27) to the Spreader Assembly.
Item #
Part #
Description
10
NB181
Nut - Nyloc 5/16-18 ZY
23
10981TK
Mount - Weldment; Truck Spreader
25
NB579
Washer - Fender, 5/16 X 1 1/4 OD ZY GR2
26
9855
Bolt - U, Sq 3/8-16 x 1 5/8" x 2 1/2"
27
11728TK
Support - Weldment; Truck Spreader
10176
Lid - Tank
10531
Adapter - Kit, 12 Volt