RuggedCom RUGGEDMAX WIN7000 ユーザーズマニュアル
Appendix A. Connector and Cable Pinouts
RuggedCom® RuggedMAX WiN7000
30
Installation Guide Rev1
A.2. Console Cable Pinouts
In normal operation, the console connector should remain closed and should only be
used by an authorized technician.
used by an authorized technician.
The console connection is a 3-pin female connector, based on the RS-232 serial standard. The
port provides a standard terminal connection through which a technician can configure and monitor
the base station through its command line interface (CLI).
port provides a standard terminal connection through which a technician can configure and monitor
the base station through its command line interface (CLI).
• Cable type: 3 wire 28AWG
• Cable connectors: DB9F, proprietary 3 pin console connector
• Cable length: 2m
• The cable is supplied by RuggedCom.
Figure A.2. WiN7000 Console Connector Pinout
Pin Number
Type
1
TX
2
RX
3
GND
Table A.2. WiN7000 Console Connector Pinout