Revox Recontrol M207 ユーザーズマニュアル

 

 

1. The Motion Detector will sense any movement and turn on 

the LCD automatically.   

2. You can use the function to change the sensitivity of Motion 

detector. (Off/ Slow / Medium / Fast). 

3. Please use 

 or 

 to change to sensitivity of Motion 

Detector. 

4. The more sensitive (eg:Fast), the more easily for the 

Re:control M207 to turn on its LCD. 

5. You can use the function to change the consumption of 

electricity. 

6. Please press 

 

to save your setting or press 

 to exit 

without saving the setting. 

 

 

1.  There will be a welcome page when you first time use the 

Re:control M207 or reset it. 

2. Please use 

 or 

 to decide if you can see the 

welcome page. (Enable/ Disable) 

3. Please press 

 

to save your setting or press 

 to exit 

without saving the setting. 

 

 

1. Please use “Calibrate” to adjust the accuracy of LCD when 

you find the Re:control M207 is not so sensitive as before. 

2. When  you are calibrating the LCD, please press the place 

where a sigh “X” shows up. 

3. Please refer to Chapter 5.5 for detailed information or press 

 

to exit without saving the setting. 

 

 
1. When you want to reset your Re:control M207, please use 

the function. It will erase all your settings in your remote. 

2. There will be a message to confirm your decision. If you 

really want to reset your remote, please tap “Yes”. Then you 
will reset it right away.