Radio Shack PRO-2018 ユーザーズマニュアル

ページ / 36
Pr
eparat
io
n
4
2. This device must accept any interference received, 
including interference that may cause undesired 
operation. 
5ECPPKPI".GICNN["
Your scanner covers frequencies used by many different 
groups including police and fire departments, ambulance 
services, government agencies, private companies, 
amateur radio services, military operations, pager services, 
and wireline (telephone and telegraph) service providers. It 
is legal to listen to almost every transmission your scanner 
can receive. However, there are some transmissions you 
should never intentionally listen to. These include:
• Telephone conversations (cellular, cordless, or other 
private means of telephone signal transmission)
• Pager transmissions
• Any scrambled or encrypted transmissions
According to the Electronic Communications Privacy Act 
(ECPA), you are subject to fines and possible imprisonment 
for intentionally listening to, using, or divulging the contents 
of such a transmission unless you have the consent of a 
party to the communication (unless such activity is 
otherwise illegal).
This scanner has been designed to prevent reception of 
illegal transmissions. This is done to comply with the legal 
requirement that scanners be manufactured so as to not be 
easily modifiable to pick up those transmissions. Do not 
open your scanner's case to make any modifications that 
could allow it to pick up transmissions that are illegal to 
monitor. Doing so could subject you to legal penalties.
We encourage responsible, legal scanner use.
Mobile use of this scanner is unlawful or requires a permit in 
some areas. Check the laws in your area.
24'2#4#6+10
7
5+0)
"#%"2
19'4
You can power the scanner using the supplied 12V, 300 mA 
AC adapter. To power the scanner using an AC adapter, 
insert the AC adapter’s barrel plug into the scanner's 
DC 12V
 
jack. Then connect the other end of the adapter to a 
standard AC outlet. 
.
.
"%#76+10"
.
You must use a 
Class 2 power 
source that supplies 
12V DC and delivers 
at least 300 mA. Its center tip 
must be set to positive and its 
plug must fit the scanner's DC 
12V
 jack. Using an adapter that 
does not meet these 
specifications could damage 
the scanner or the adapter. 
Always connect the AC adapter 
to the scanner before you 
connect it to AC power. When 
you finish, disconnect the 
adapter from AC power before 
you disconnect it from the 
scanner.
!
R
"9#40+0)"
R
"
To prevent electric shock, do not 
use the AC adapter's polarized 
plug with an extension cord, 
receptacle, or other outlet unless 
you can fully insert the blades to 
prevent blade exposure.
20-424.fm  Page 4  Monday, September 9, 2002  9:44 AM