Proxim Tsunami MP.11 and MP.11a CPN 65755B ユーザーズマニュアル

The serial connection properties can be found in HyperTerminal as follows: 

1.  Start HyperTerminal and select Properties from the File menu. 

2. Select 

Direct to Com 1 in the Connect using: drop-down list (depending upon the COM port you 

use); then click Configure.  A window such as the following is displayed: 

 

3.  Make the necessary changes and click OK. 

4. Click 

the 

Settings tab and then ASCII Setup….  A window similar to the following is displayed: 

 

5. Ensure 

that 

Send line ends with line feeds is selected and click OK twice.  HyperTerminal is now 

correctly configured.