Proxim Tsunami MP.11 and MP.11a CPN 65755B ユーザーズマニュアル

You can set the Configuration parameter:  Select from these settings for the type of Ethernet 
transmission (Configuration drop-down box): 

10 Mbit/s – half-duplex 

100 Mbit/s – full-duplex 

10 Mbit/s – full-duplex 

autospeed – half-duplex 

10 Mbit/s – auto-duplex 

autospeed – auto-duplex 

100 Mbit/s – half-duplex 

Half-duplex means that only one side can transmit at a time. 
Full-duplex allows both sides to transmit. 
Auto-duplex selects the best transmission mode for the given configuration. 

Click the Configure button and the SNMP tab to set passwords, set trap host IP addresses, and limit 
access to the MP.11/a management interface.  You can enable:  All Interfaces, Only Ethernet, Only 
Slot A, or None. 

 

 

You can enable or disable different types of traps in the system.  By default, all traps are enabled. 

Trap Host Table 

This table shows the SNMP management stations to which the MP.11/a sends system traps.