Philips Auto Iris Varifocal Lens VCM7177 ユーザーズマニュアル
Introduction
This camera is especially designed for the Philips Observation System. It can be used in
combination with a system monitor (System, Quad or Slave). The System and Quad monitor
provides input for up to 4 cameras. The slave monitor can handle 1 camera in a stand-alone
configuration. The camera has a standard camera mount allowing installation on, for example, a
tripod or wall bracket.
combination with a system monitor (System, Quad or Slave). The System and Quad monitor
provides input for up to 4 cameras. The slave monitor can handle 1 camera in a stand-alone
configuration. The camera has a standard camera mount allowing installation on, for example, a
tripod or wall bracket.
Power supply:
The safe low voltage (16-32V
The safe low voltage (16-32V
_
) for the camera and system accessory is supplied by the monitor
through the system cable. If the length of the system cable is more than 200m/600ft a mains
power adapter should be used to provide the camera power supply.
power adapter should be used to provide the camera power supply.
Camera accessories:
The following camera accessories are available:
The following camera accessories are available:
•
Auto-iris lens 4mm (F1.2)
•
Auto-iris lens 8mm (F1.2)
•
Protective camera housing
•
Mains power adapter
g
4