OPPO Digital OPDV971H ユーザーズマニュアル

ページ / 42
 
34 
REFERENCES 
Useful Notes 
•  In order to prolong the service life of your DVD player, it is recommended to wait at least 30 
seconds before you turn it on again after switching it off. 
•  Remove disc and turn off power after operation. 
•  Some functions of the player may not be applicable to certain discs. 
•  Some discs with special features may not be fully supported by the player.  This is not a 
malfunction of the unit. 
•  In case of player malfunctioning, please turn it off, wait for 30 seconds and turn it back on.  If the 
problem still exists, please follow the troubleshooting instructions or contact an OPPO service 
center. 
 
Troubleshooting 
Use this chart to help you solve operational problems.  If there are any problems that you cannot solve, 
please contact your OPPO service center. 
 
Symptom 
Possible Cause 
Solution 
Reference 
Page 
Audio cable is not properly 
connected 
Check audio cable, and then reconnect if necessary. 
No sound 
Muting is activated 
Press the MUTE button to cancel the mute. 
Video cable is not properly 
connected 
Check video cable, then reconnect if necessary 
TV input is not correctly 
selected 
Select the input to which the DVD player is connected 
 
Video output format is not 
support by the TV 
When playback is completely stopped, repeatedly 
press the DVI button 
No picture 
Video system is not supported 
by the TV 
Press the P/N button or set the correct TV Type. 
Video system is not supported 
by the TV 
Press the P/N button or set the correct TV Type 
No color 
Saturation set too low 
Check the saturation setting on TV and DVD player  
Picture rolling 
Video system is not supported 
by the TV 
Press the P/N button or set the correct TV Type 
No disc or incompatible disc 
loaded in player 
Eject disc and check 
Disc not properly loaded 
Eject disc and make sure the label side is facing up 
and the record side is facing down  
“No Disc” error 
Condensation on the Laser 
pick-up head 
Turn on the player, eject the disc and leave the player 
on for about an hour 
Remote control is out of range 
Use the remote control within the effective range  
Remote control 
failure 
Low battery 
Replace the batteries 
Scratched or damaged disc is 
used 
Replace the disc 
Some functions are not 
available during playback 
Stop playback completely, then try again 
Temporary 
function failure 
Interference from other devices 
Identify interference by turning off other devices, and 
then relocate or replace the offending device 
Some setup 
menu items are 
grayed out 
Some setup options cannot be 
changed while a disc is playing.  
Some setup options may be 
mutually exclusive with other 
setup options. 
Fully stop playback, eject the disc and try the setup 
menu again.