Ninja NJ602CO ユーザーズマニュアル

®

Shaft

 

1  Remove all packaging material and labels 

from the appliance.

2  Wash the lids, pitcher, bowl and 

attachments in warm, soapy water with 
a soft cloth.  

3  Rinse and dry thoroughly.

4  The pitcher, bowl, lids and 

attachments, are all dishwasher safe.  
It is recommended that the lids and 
attachments be placed on the top rack.  
Ensure that the attachments are removed 
from the containers before placing in the 
dishwasher. 

5  Wipe the motor base and dough station 

clean with a damp cloth.

 

 

CAUTION: Make sure that the motor base 
is unplugged from the power source.

1  Place the motor base on a clean, dry, 

level surface. 

2  Lower the pitcher or the bowl onto the 

motor base.  (

Fig. 1) 

3  Rotate the container to the left as far as 

it will go.  As the container rotates, it will 
lower and the safety tabs on the bottom 
of the container will slide under the 
safety tabs on the top of the motor base.  
(

Fig. 2) 

4  The pitcher or bowl can be placed on the 

motor base two ways; the handle can be 
on the front right corner or the front left 
corner.  (

Fig. 3a, Fig. 3b)

5  Holding the desired attachment by 

the shaft, place it onto the gear shaft 
inside the container.  Ensure that the 
attachment fits around the gear shaft 
and that it is standing straight.   
(

Fig. 4a, Fig. 4b)

 

1  Place the pitcher or bowl onto the motor 

base and insert the desired attachment.  
(See ‘HOW TO ASSEMBLE’.)

2  Add the ingredients to the container.  

Make sure your total of ingredients 
don’t go higher than the highest 
measured marking line on the side of the 
containers. 

 

 

40-oz Bowl
Dry - Do not exceed 2 1/2 cups (20 oz.)
Wet - Do not exceed 5 cups (40 oz.)

 

72-oz Pitcher
Dry - Do not exceed 2 1/2 cups (20 oz.)
Wet - Do not exceed 9 cups (72 oz.)

Shaft

 

IMPORTANT: Never add ingredients 
into the container before placing 
the attachment in first.

  IMPORTANT: Attachments are not 

interchangeable.

  CAUTION: Blades are sharp! Use 

extreme caution when handling 
the blade assemblies.  Always hold 
them by the shaft.

   IMPORTANT: DO NOT attempt to 

operate the appliance without the 
lid on. 

 

IMPORTANT: Never run the 
appliance empty.

 

CAUTION: Use extreme caution 
when processing hot foods 
or liquids to avoid accidental 
scalding or burns.  Do not process 
food or liquid that is hotter 
than 180°F/82°C.  Allow very 
hot ingredients to cool before 
processing.

 

When processing hot foods or 
liquids, always open the spout cap 
to vent the steam.  Keep hands and 
other exposed skin away from the 
opening to prevent possible burns 
or scalding.

 

WARNING: Secure the appliance 
while in use by pressing down on 
the lid with one hand.

 

CAUTION: Never remove the 
container while the appliance is still 
running.  

   

WARNING: Never leave the 
appliance unattended while in use.